Back to Y strainer
Basket Strainer
basket strainer is also known as T type strainer, basket strainer is named from the shape of the filter, and t type strainer is named from the shape of the entire strainer valve.
The material of basket strainer can be cast iron, carbon steel, copper or stainless steel etc. According to the characteristics of the water,oil or gas, the user can choose the corresponding material. For example, water supply system usually choose cast iron basket strainer, because the water supply system usually needs large size, the pressure is not very high, cast iron basket strainer can meet the requirements, but also low cost. Therefore, in water supply system, the cast iron material basket strainer is very popular. In the high-pressure oil and petrochemical systems, it is necessary to choose carbon steel material that can withstand higher pressure. Stainless steel basket strainer is more expensive, but because of its corrosion resistance and sanitary properties, it is generally used in the pharmaceutical, food and other industries.
Basket strainer drawing
Judberd basket strainer photos
basket strainer installation
The basket strainer, like the y strainer, is used to filter impurities from liquids and gases, thus ensuring the proper functioning of pumps, valves and other piping components downstream in the pipeline and the good working condition of the pipeline.
it is necessary to install a shut-off valve in the upstream of the basket strainer, the shut-off valve can be gate valve or butterfly valve,If the filter of basket strainer and y strainer need to be cleaned or replaced, or even if the whole strainer valve needs to be replaced or repaired, the upstream shut-off valve can be closed to perform the corresponding operation. Of course, together with the y strainer, it is necessary to install the dismantling joint which are specially designed to facilitate valve removal.
basket strainer structure
The structure of basket strainer is very simple, normally it include valve body, valve bonnet, filter, plug, gasket, bolts and nuts.
The structure can be in-line type or high inlet and low outlet type as below diagram.